Electrical Connectors
for Japanese Motorcycles
I get these connectors directly from the manufacturer.  They are of the highest quality
and are as good or better than the OEM parts.  Every plug comes with a full set of
brass terminals to populate it.

Currently all the plugs I carry are used on Japanese motorcycle charging systems,
however if I order enough of any one style, I can get any plug used on any Japanese
bike.  If there is something you’d like to see me carry, eMail me either a picture or a
very good description of it.  If I get enough requests, I’ll add it to my next connector
order.
These connectors require a special crimper tool.  The crimper below is a good tool for the money but it is a little
more work to use that the 1-step crimpers that cost 2 to 4 times as much.
Click here for a step-by-step guide with pictures and there is also pictures of another crimper that can be used for
this job.  
6 prong female plug with locking tab

Order number 6PFL $2.05
6 prong male plug with locking tab

Order number 6PML $2.05
4 Prong male plug with locking tab

Order number 4PML $1.55
4 Prong female plug with locking tab

Order number 4PFL $1.55
3 Prong female plug with locking tab

Order number 3PFL $1.45
3 Prong male plug with locking tab

Order number 3PML $1.45
Pair of 3.8mm bullet connectors with insulators
Order number CBP  $0.60
Do not hesitate to eMail me with any questions you have about my parts
Return to the Oregon Motorcycle Parts home page
8 prong plug set

This set includes the male and female locking plugs,
8 male and 8 female terminals
Order number
8PLPS $4.40
The plug set replaces the plug from the alternator side of the engine many 1969~1978 Honda fours, the rectifier plug on
the GL1000, and the rectifier/reglator plug on later Yamaha 650 twins.   This same plug set is included with the
VRR6ST11 regulator/rectifier unit for the ST1100 Honda.
2 Prong plug set

This set includes both the male and female locking plugs,  2
male and 2 female terminals
Order number
2PLPS $2.20
Crimper for the open barrel terminals that go with
the plugs on this page

Order number CR1 $14.00
Repair Harness
Replacement segments for damaged sections of motorcycle waring harnesses.  Every OMP repair harness
comes with high quality butt splice joints and enough heat shrink tubing to seal the repair.  We recomend
using our CR1 or similar type crimper to install these.
Rectifier repair harness for 1969~1978 Honda Fours. The repair harness includes a female plug
with 5" of color correct wires for the 1969~1979 Honda 350 ~ 750cc SOHC fours.

$4.50
RH-1H

For  SOHC Honda fours with damaged a rectifier plug
Rectifier repair harness for Suzuki GT triples. The repair harness includes a female plug with 5" of
color correct wires for the Suzuki 380 to 750 triples.

$4.50
RH-1SGT

For  SOHC Honda fours with damaged a rectifier plug
Rectifier Repair harness for Honda singles and twins.  The repair harness includes a female plug
with 5" of color correct wires for these Hondas (usually 200cc and smaller.)

$3.50
RH-2HF
No picture yet
No picture yet
No picture yet
Rectifier Repair harness for Honda singles and twins   The repair harness includes a male plug with
5" of color correct wires for these Hondas (250cc ~500cc twins and singles.)

$3.50
RH-3HM

For  SOHC Honda fours with damaged a rectifier plug